Bartex™ |
| A water based odorless shielding/grounding/anti static coating for finishing protecting numerous plastics such as electronic cabinets, computers and engineered plastics. |
| Bartex ™ (156) | ||
| Bartex™ dries rapidly on both Thermoplastic + Thermoset Plastic materials. | ||
| Polymers such as
acrylics, polystyrene, Noryl, ABS, Polycarbonates, Valox, Phenolics, Epoxy + Fiberglass laminates are rapidly finished by Brush - Roll on or spray finish |
||
| Benefits | ||
| Bartex functions as a
ground coat barrier with anti static/stray current arc/spark shock absorption. As a surface discharge finish electronic assemblies/circuit boards are destaticized. |
||
| Advantages include: | ||
| Repelling Dust/Lint/Film Attraction | Finger Tip Shock Elimination | Cleaner Assemblies |
| Elimination of Destroyed Circuitry Due To Energized Build Up | ||
| Properties - Technical Details | ||
| • Applications | ||
| Thin Film barriers for electronics, computers , storage and communications facilities. | ||
| • Substrates | ||
| Plastics, Metals + Dissimilar Materials | ||
| • Surface Preparation | ||
| Apply to clean dry oil- residue free surfaces. Wipe down surfaces with isopropyl alcohol to remove films, dust etc | ||
| • Application Methods: | ||
| Spray VIA HVLP or Siphon cup gun Brush or Roll on procedure | ||
| • Adhesion | ||
| ASTM # 5B | ||
| • Hardness | ||
| Excellent | ||
| • Weight Per Gallon | ||
| 11 Ibs per gallon | ||
| • Durability | ||
| Long-term | ||
| • Solids | ||
| 45% | ||
| • OHM Resistance | ||
| < .05 @ .8 MIL | ||
| • Viscosity | ||
| 12-15" # 3 Zahn Cup | ||
| • Reduction -Thinning | ||
| Use as Received . Cut / Dilute with distilled water | ||
| • Drying - Curing | ||
| Force Dry 30 minutes @ 140 -160 °F NOTE!! Test on Substrate to avoid Warpage -Distortion. Various Plastics require a longer lower temperature. Bartex will air dry at ambient temperature over 3 HR period. | ||
| • Film Thickness | ||
| Recommended build Up 1.0 +/- 0.2 MILS | ||
| • Cover - Yield | ||
| 100 sq ft @ 1.0 MIL per quart | ||
| • Voc | ||
| 2.49 Ibs per gallon | ||
USER RESPONSIBILITY |
||
| The information
provide in the attached bulletin pertains to the product as shipped by Zeller
International. The responsibility to provide a safe workplace remains with the user. The
user should consider the health hazards and safety information contained herein as a guide
and should take those precautions required in an individual operation to instruct
employees and develop work practice procedures for a safe work environment. The information contained herein is to the best of our knowledge and belief, accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by use of this material. It is the state and local laws and regulations. |
||
DISCLAIMER |
||
| As Zeller
International, Gary Zeller, or any in his employ has no control over the use to which
others may put the material, it does not claim or warrant that in your particular
circumstances the results you will obtain from the u8se of the product will be the same as
those described in this bulletin, or that you will find the information, recommendations,
complete, accurate, or useful. We accept no liability, in negligence or otherwise, for any
damage resulting from your reliance on the information or recommendations in this
bulletin. You should test the material to determine if the material is suitable and/or our claims valid in your particular circumstances. None of the possible or suggested uses of the materials in this bulletin are a license under any patent covering such use or a recommendation for use of such materials in the infringement of any patent. |
||
copyright ZELLERINTERNATIONAL 2000,2001,2002 |