| Kleer Plaztik™ (155) |
| |
| Kleer Plaztik is for: |
| Water Sports |
Flows |
Rivulets |
| Chilled Beads |
Icicles |
Frosty Embellishments |
| Drops of Water |
Cold/Frozen
Accents - Food Styling |
Dressing/Accents/Glazes/Cold
Glossy Finishes |
| Graphic Shapes |
Dioramas |
Models-Props |
| |
| Kleer Plaztik™ accepts shavings,
chips, and powdery fillers for diverse finishes. Kleer Plaztik™ is used as received
for hard/stiff self supporting shapes such as icicles. Kleer Plaztik™ dries to a glossy
ultra smooth finish. |
| |
| Kleer Plaztik™ is a crystal clear
single component air drying solvent based coating polymer which dries to a rigid hard
clear coating for overcoating, finishing leather, wood, metals, textiles, rubber, foams,
concrete, plaster, and plastic surfaces. |
| |
| Kleer Plaztik™ is a
sprayable-brushable solution which dries to a rigid stiff film with high gloss and
abrasion resistance. |
| |
| Kleer Plaztik™ protects surfaces
against chip-mar-fracture damage, Kleer Plaztik™ accepts numerous
dyes, pigments, and fillers for attractive finishing. Atomized metal powders are routinely
added for cold cast bonded metallic finishes for high luster true metal alloy appearance. |
| |
| Kleer Plaztik™ is an ultra hard high
solids formulation finding a multitude of end use applications. Much like vacuum formed
sheet plastics Kleer Plaztik™ forms a tough fracture resistant thermoplastic film which
can be built up/layered to any thickness. |
|
|
| KLEER PLAZTIK ™
IS A SINGLE COMPONENT LIQUID DISPERSION WHICH DRIES-SETS AND HARDENS TO A STIFF RIGID
CLEAR PLASTIC FOR THIN/TOUGH SHELLED MASKS, PROPS, GRAPHICS AND SIGNAGE. |
| |
| BRUSH-SLUSH-SPRAY APPLY KLEER
PLAZTIK ™ INTO/ONTO CLAY FIGURES OR ANY MODEL-MOLD. |
| |
| KLEER PLAZTIK ™
HARDENS TO A SHARPLY DEFINED STRONG PLASTIC. |
| |
| MUCH LIKE THERMOFORMED HALLOWEEN
MASKS, PUPPETRY FIGURES TOYS, NOVELTIES, SCULPTURE, DISPLAY-EXHIBIT PARTS. KLEER
PLAZTIK ™ AIR DRIES AT ROOM TEMPERATURE TO A SMOOTH, GLOSSY THERMOPLASTIC
SHAPE WHICH CAN BE POST FORMED-HEATED AND SHAPED INTO ANY DESIRED CONTOUR. |
| |
| PIGMENTS.DYES, FILLERS, METALLIC
PIGMENTS, ALLOY POWDERS, FIBERS, GLITTER, GLOW-IN-THE-DARK COLORANTS CAN BE ADDED FOR
PERMANENT IN SITU BONDED EFFECTS. |
| |
| KLEER PLAZTIK ™
IS EXCELLENT FOR NUMEROUS CREATIVE FUNCTIONAL USES SUCH AS: |
 |
COSTUMES |
|
ACTION-STUNT WEAPONS |
|
REPLICAS |
|
SCENERY |
|
STIFFENING/RIGIDIZING |
|
COSTUME JEWELRY |
|
OVERCOAT PROTECTION |
|
REPAIRS-RESTORATIONS |
|
FINISH-CLADDING |
|
CHRISTMAS ORNAMENTS |
|
GADGETS |
|
SCULPTURE |
|
TROPHY FINISHING |
|
BASEBALL BATS |
|
ARCHITECTURAL PRESERVATION |
|
REPAIRS |
|
DOLL PARTS |
|
FREEFORM DIMENSIONAL SHAPES
& SEALS |
|
|
SPECIAL PROPS |
|
ORNAMENTS |
|
ARCHITECTURAL REPLICAS |
|
OVERSIZED MODELS |
|
PHOTO STYLING |
|
AQUARIUM FIGURES |
|
ENCAPSULATION |
|
WATERPROOFING |
|
PROTOTYPES |
|
GRAPHICS/SIGNAGE |
|
REPLICA ARMOR |
|
DIORAMAS |
|
PICTURE FRAME FINISHING |
|
DISPLAYS/EXHIBITORY |
|
BINDER OR FILLERS |
|
AIRPLANE MODELS |
|
ELECTRONIC ENCAPSULATION |
|
| |
| KLEER PLAZTIK ™
IS A SEMI VISCOUS SOLVENT BASED DISPERSION FUNCTIONING AS A SINGLE COMPONENT POLYMER FOR
DIMENSIONAL HIGHLY DETAILED PARTS FOR LONG TERM INTERIOR-EXTERIOR ALL SEASON APPLICATIONS. |
| |
| KLEER PLAZTIK ™
IS USED AS RECEIVED IN ITS NEAT FORMAT. |
| |
| KLEER PLAZTIK ™
CAN BE MODIFIED OR ADJUSTED AS NECESSARY ANCILLARY USES INCLUDE THINNED LOWER VISCOSITY
SPRAYABLE SOLUTIONS FOR SURFACE COATINGS. |
| |
| KLEER PLAZTIK ™
IS FOR FINISHING-LACQUERING/OVERCOAT FILMS ON LEATHER, TEXTILES, FOLIAGE, CARVED
POLYURETHANE FOAMS. |
| |
| KLEER PLAZTIK ™
REPLICATES VACUUM FORMED SHEET PLASTICS FOR PLATEABLE-PAINTABLE MODELS. |
| |
| HIGH PERFORMANCE REPLICAS SUCH AS
CELLULOID DOLL PARTS ARE FORMED INSIDE FLEXIBLE RUBBER MOLDS. |
| |
| FORM THIN/THICK-SMALL/LARGE
SHAPED PARTS. |
| |
| KLEER PLAZTIK ™
MOLDS TO ANY CONTOUR-CURVE FOR SHARPLY DEFINED TOUGH LIGHTWEIGHT PARTS. |
| |
| STRUCTURAL LOAD BEARING-IMPACT
RESISTANT PARTS ARE FORMED WITH LAMINATED-ENCAPSULATED FABRICS, VEIL CLOTH, FIBERGLASS,
CARBON FIBER AND DECORATIVE TEXTILES FOR ROOM DIVIDER PANELS. LIGHT DIFFUSERS, LAMP
SHADES, AND BACK LIT SIGNS ALSO DEMONSTRATION MODELS FOR MUSEUMS, TRADE SHOWS AND
SCULPTURE. |
| |
| KLEER PLAZTIK ™
ACCEPTS POWDERED ATOMIZED METAL POWDERS, BRONZE,PEWTER,ALUMINUM,ZINC,COPPER ALLOYS, CAN BE
ADDED FOR BONDED SIMULATED METAL. DRIED-HARDENED PARTS CAN BE HAND BUFFED, POLISHED TO A
TRUE METAL LUSTER. |
| |
HELMETS, SUITS OF ARMOR, SHIELDS,
BREAST PLATES, SIMULATED HAND FORGED REPLICA METAL PARTS ARE EASILY FORMED IN
PLASTER, RUBBER, & FIBERGLASS MOLDS. |
| |
| KLEER PLAZTIK ™
CAN THICKENED-TH1NNED AND ADJUSTED TO SUIT SPECIAL APPLICATIONS FOR FIRE CODE COMPLIANCE
AND OTHERSPECIALIZED REQUIREMENTS. |
| |
| PATENT LEATHER, WET GLOSSY OR
DULL / MAT FINISHES ARE EASILY PREPARED WITH STIR IN ADDITIVES. |
| |
| EXISTING WEAK FLIMSY PARTS ARE
BACK COATED-STIFFENED - STRENGTHENED - SUPPORTED. |
| |
| KLEER PLAZTIK ™
IS EXCELLENT FOR RAPIDLY FORMING MILLINERY, FASHION, COSTUME - CLOWN PARTS. |
| |
Please
click the link below for Kleer Plaztik ™
Questions & Answers |
>>
Kleer Plaztik Q&A << |