Acrilon™ |
A clear UV stable one component coating and primer 100% acrylic water based compound. |
| Acrilon™ (128) |
| A water based, non-yellowing, clear primer/sealer which assures bonding of paints, epoxies, urethanes and diverse materials to concrete, plaster, fiberglass, plastics, wood and metals. |
| Acrilon™ prepares and conditions difficult unbondable surfaces. As an aggressive adhesion promoter the interfacial bond line is assured. Acrilon™ contains functional chemical groups which combine and crosslink with many rigid or elastomeric finishing agents. |
| Interfacial seal and prime mechanics include rapid performance kinetics based on carboxyl -hydroxyl radicals. Exemplary primer preparation on alkaline surfaces is assured without post delamination, blistering, lifting, cracking, or peeling of finishing materials. As a non-toxic, water based/sealer/primer and surface conditioner, Acrilon is used in many industries to enhance rapid adhesion with durable resistance to alkaline materials, water and pH factor. |
| Acrilon™ forms a micro membrane clear finish on concrete and meets ASTM C 309-95 type 1, class B for cement floors, walls and architectural panels made from fiber reinforced gypsum and cementitious products. |
| Epoxies, urethanes and two component resins when applied to a pre-primed concrete surface sealed with Acrilon™ demonstrate a stronger fortified weld. Damp, uncured concrete and gypsum's cure faster and enables early finishing with tip coats such as epoxies, acrylic/urethane finishes. |
| Acrilon™ is an effective penetrating sealer for new or old concrete masonry and gypsums. Acrilon™ fills pores and voids thus providing a uniform bridged membrane. When dry Acrilon™ forms a breathable film for subsequent overcoating of other coatings. In addition, Acrilon can be used to sea blocks, bricks, compaction formed EcoBlocks, adobe walls and a variety of surfaces. |
copyright Zeller International & Catskill Computer Services, 2000 |